How to Apply Vinyl Decals
Vinyl decals work best on clean, dry and smooth surfaces. Follow these steps for a bubble-free, long-lasting finish.
- 1
Clean and dry the surface thoroughly.
- 2
Rub over the transfer tape firmly with a squeegee or bank card.
- 3
Carefully remove the backing paper.
- 4
Position the decal on the surface.
- 5
Press firmly from the centre outwards.
- 6
Slowly peel away the transfer tape.
- 7
Allow the vinyl time to bond before washing or exposing it to moisture.
Tip:
Avoid applying decals in direct sunlight or very cold conditions — room temperature gives the best result. For curved surfaces such as bottles, work slowly from the centre outward to avoid trapping air bubbles.